CJ1奖状飞行训练设备维护仿真建模与实现技术研究
DOI:
CSTR:
作者:
作者单位:

中国民航飞行学院模拟机训练中心 广汉 618307

作者简介:

通讯作者:

中图分类号:

TP391

基金项目:

四川省科技厅项目(2018GZYZF0068) 学院飞行仿真研究中心项目(JG2018-07)


Research on simulation modeling and realization technology of CJ1 flight training equipment maintenance
Author:
Affiliation:

Simulation Training Center , Civil Aviation Flight University of China, GuangHan 618307, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    奖状飞行模拟机系统繁多,与真飞机相比,维护手册章程简单,维护技术要求高。按照现有的维护手册很难精准判断故障组件,并对故障组件快速完成拆装更换工作。针对此问题本文通过分析奖状飞行模拟机的系统结构,提出并建立了维修仿真管理模型MSM(Maintenance Simulation Model),构建了MSM模型框架,定义了MSM模型的3个要素:状态、迁移和约束条件。基于状态定义维修组件的各种状态情况,基于迁移定义维修实现的触发条件,基于约束条件建立状态与触发条件的制约关系。并阐述了MSM模型的虚拟场景的渲染驱动和切换。最后以仿真维修平台中声音控制组件拆装仿真为例,验证了维修仿真管理模型的有效性。

    Abstract:

    Citation flight simulator has many systems, compared with the real aircraft, the maintenance manual rules are simple,but the maintenance technical requirements are high. According to the existing maintenance manual, it is difficult to accurately judge the fault components, and quickly complete the disassembly and replacement of the fault components. To solve this problem, the Maintenance Simulation Model (MSM) is proposed and established by analyzing the system structure of the flight simulator with awards, and the MSM Model framework is constructed. The three elements of the MSM Model are defined: state, migration and constraint conditions. The various states of maintenance components are defined based on state, the trigger conditions of maintenance implementation are defined based on migration, and the restriction relationship between state and trigger conditions is established based on constraint conditions. The rendering drive and switching of virtual scene of MSM model are also described. Finally, the disassembly of voice control components in the simulation maintenance platform is taken as an example to verify the effectiveness of the simulation maintenance management model.

    参考文献
    相似文献
    引证文献
引用本文

李会茹,黄欢. CJ1奖状飞行训练设备维护仿真建模与实现技术研究[J].电子测量技术,2021,44(2):1-5

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2024-12-19
  • 出版日期:
文章二维码
×
《电子测量技术》
财务封账不开票通知